Print

German researchers extract hydrogen from wet biomass

By Friedrich-Alexander-Universitat Erlangen-Nurnberg | February 13, 2013

Renewable energy sources—such as hydrogen from wind power—are an important step towards reducing greenhouse gases and protecting our climate. Hydrogen can be produced sustainably using other sources than just wind power. The European research project SusFuelCat aims to improve the process of extracting hydrogen from wet biomass. Professor Bastian Etzold, junior professor for catalytic materials at the excellence cluster Engineering of Advanced Materials at Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), is responsible for initiating and coordinating the international project. The European Union will fund SusFuelCat from 2013 for a period of four years with 3.5 million euros.

At the moment, hydrogen can only be extracted from biomass using large amounts of energy. For example, wet biomass must be dried intensively before it can be processed. For SusFuelCat, researchers are using aqueous phase reforming (APR) as an alternative to the drying process. In this method, the wet biomass comes into contact with a catalyst. The chemical reactions break down the material and release almost pure hydrogen.

The benefit is the process does not consume much energy and is carried out at low temperatures and low pressure. This means that the energy-intensive drying process is no longer necessary. APR is especially efficient as even the water from the biomass can be broken down to produce hydrogen—which is only possible thanks to the low temperatures. In comparison to fossil fuels, hydrogen does not only save precious energy, using hydrogen also protects the environment from greenhouse gases, as it only produces steam on combustion rather than CO2.

The key to making the process more efficient are the catalysts. If the researchers can optimize the catalysts, they can increase the sustainability of the entire process. Catalysts used at the moment contain expensive precious metals such as platinum and palladium which are finely distributed on ceramic plates. The SusFuelCat project aims to reduce the amount of precious metals or replace them with other metals without affecting the efficiency of the APR process. Carbon-based materials such as nano tubes or activated carbon could be used as carriers as they promise long-term stability and environmentally-friendly recycling of the metals.

For optimizing the catalysts, the researchers are using a combination of diverse state-of-the-art methods. On a molecular level, they are using computer simulations. This allows the catalyst properties to be adjusted precisely. New analysis techniques allow the researchers to monitor the success of the APR process, for example by using spectroscopy to see inside the reactor.

Long-term experiments conducted by industrial partners are also an important part of the optimization process. In all, six research institutions, one international company and three small and medium-sized enterprises are involved in the project. The industrial partners come from Germany, Finland, Great Britain, the Netherlands, Russia and Spain.

“The consortium is certain that we can make an important contribution to the energy policy of the European Union by increasing the use of renewable energy sources with this new development,” Etzold said. “Our findings will also have the added benefit of improving catalyst efficiency in related processes.”

The abbreviation SusFuelCat stands for “Sustainable fuel production by aqueous phase reforming–understanding catalysis and hydrothermal stability of carbon supported noble metals.”

 

 

 

0 Responses

     

    Leave a Reply

    Biomass Magazine encourages encourages civil conversation and debate. However, we reserve the right to delete comments for reasons including but not limited to: any type of attack, injurious statements, profanity, business solicitations or other advertising.

    Comments are closed